3. Installation
WARNING
Risk of falling. Measurements are made directly in situ with this instrument. To prevent the risk of
falling, ensure compliance with all local safety regulations on securing with ropes and on the use of
adequate protective clothing and footwear.
Risk of injury. Do not attach the measuring instrument to your body. The measuring sensor could
be accidentally caught in a motor or stirrer and could endanger the user through the connected
sensor cable.
3.1. Content of sensION ™+
3.1.1. Component list
Code
LPV4500.97.0002
LPV4551.97.0002
3.1.2. Accesorios
• Carrying case.
• Sensor electrolyte (25 mL).
• Replacement membrane
• Two 90-mL bottles for sample and sensor
cleaning.
• Tube for calibration.
After removing the instrument, check each part for possible damage. All components on the attached list
must be present. If there are any missing or damaged parts, contact the manufacturer or distributor.
sensION+ DO 6_HACH_0710.indd ANG:5
sensION+ DO 6_HACH_0710.indd ANG:5
DO 6
Instrument
sensION ™+
DO 6
LZW5120.97.0002
sensION ™+
DO 6
Sensor
Accessories
––
––
sensION
™
DO6
Fig. 1. Equipment composition
Batteries
Manual
5
14/9/10 10:51:18
14/9/10 10:51:18