Bosch AEC-AMC2-EMEA01 Manuel D'installation page 7

AEC-AMC2-EMEA01 - Installation manual
Content of the accessories kit:
A = Pre-assembled cable to connect the AMC to the power
supply
B = Pre-assembled cable to connect the rechargeable batteries
to the UPS (uninterruptable power supply) which is included in
the power supply
C = Cable using 24 V mode
D = Grounding cable for the cover
E = Cable ties to secure the pre-assembled cable
F = Cable ties to fix the rechargeable batteries
G = Pre-assembled cable with temperature sensor
H = Three screw anchors S8 and wood screws M6 x 50
J = Bracket for cable fixing
Before the assembly of the housing the following preparations
should be done and conditions be considered.
The opening for the AC supply cable (position 7) is covered by
two plastic inserts. The AC cable can either be routed through a
standard cable duct (40 mm x 25 mm) or be introduced directly
Bosch Access Systems GmbH
en
F.01U.097.255 | V 4.0 | 2010.10
7