Waste Electrical And Electronic Equipment - Gallagher FAULT FINDER Notice D'installation

REPLACING THE FAULT FINDER
BATTERY
Use a 3V Lithium coin cell ba ery CR2032.
1. Remove the screws.
Note: Make sure the black seal sits neatly in place to
ensure the Fault Finder is waterproof.
SPECIFICATIONS
• Voltage: 0.2 to 15 kV
• Current: 1 - 99 Amps
• Ba ery: CR2032
WASTE ELECTRICAL AND
ELECTRONIC EQUIPMENT
electrical and electronic equipment. The separate collec on
and recycling of your waste equipment at the me of disposal
will help conserve natural resources and ensure that it is
recycled in a manner that protects human health and the
environment. For more informa on about where you can
drop off your waste equipment for recycling, please contact
your local city recycling offi ce or the dealer from whom you
purchased the product.
This symbol on the product or its packaging
indicates that this product must not be
disposed of with other waste. Instead, it is your
responsibility to dispose of your waste
equipment by handing it over to a designated
collec on point for the recycling of waste
2. Replace the ba ery.
English
7