Setting Up Your Dvd Combo; Connecting An Antenna, Cable Tv, Or Satellite Tv - Insignia NS-19RTR Guide De L'utilisateur

Setting up your DVD combo

Connecting an antenna, cable TV, or satellite TV

Before you plug in the antenna, cable TV, or satellite TV, check the
cables for bent or broken pins. If a pin is bent, try to straighten it. If
you cannot straighten the pin or if a pin is broken, replace the cable.
If you are connecting an outside antenna or cable TV without a box,
connect the cable to the ANT. jack on the back of your DVD combo
and to the incoming antenna or cable jack.
If you are connecting cable TV with a box, connect a cable to the In
jack on the box and to the incoming cable jack. Then connect a cable
to the Out jack on the box and to the ANT. jack on the back of your
DVD combo.
Warning Always disconnect power to all devices, including your DVD combo,
when you are installing devices or moving your DVD combo. Always
unplug the antenna, cable TV, or satellite TV before you move your
DVD combo.
Antenna
Cable TV
OR
Incoming
antenna/cable (no box)
OR
Note
Do not disconnect the cables at the box. Some cable TV providers
use scrambled signals and require a special converter to receive
scrambled channels. Consult your cable TV provider.
14
NS-19RTR 19" DVD Triple Combo
Incoming cable or satellite
box (see note)
www.insignia-products.com
Back of DVD combo
ANT. AUDIO OUT
COAXIAL
ANT.
ANT. jack