Preparing The Remote Control; How To Use The Remote Control - ALDEN ALD-13960 Guide D'installation Et D'utilisation

Preparing the remote control

How to use the remote control

- Point the remote control towards the television when using it
- Avoid damaging the remote control
- Do not leave the remote control near a source of heat or humidity.
- Do not spill water or leave anything damp on the remote control
- Do not open the remote control.
ALD-13960
- Remove the battery cover on the back side of the remote control.
- Put 2 new 1,5AAA batteries in place: make sure polarity is correct.
- Put the cover back in place.
Caution :
- A non conform use of the batteries can cause leaking and corrosion.
- Do not install the batteries in the wrong way.
- Do not charge, open, overheat nor short-circuit the batteries.
- Do not throw the batteries in the fire.
- Do not leave old batteries in the remote control.
- Do not use different kinds of batteries, for example an old battery with a new one.
- If the remote control is not used during a long period, remove the batteries.
- If the remote control does not function or if you have to be near the TV to use it: change the
batteries.
- If the batteries have leaked, clean the compartment and the connectors and put new
batteries in place.
49