How To Use The Remote Control - ALDEN 110420 Guide D'installation Et D'utilisation

How to install the batteries in the remote control

How to use the remote control

- Orientate the remote control towards the television when you use it.
- Avoid any shocks.
- Do not leave the remote control near a source of heat or humidity.
- Do not spill water on the remote control, nor lay anything humide on it.
- Do not open the remote control.
A-N-09505
- Remove the battery cover placed on the back of the remote control.
- Put two new 1.5V AAA batteries in place: make sure the polarity is correct.
- Put the cover back in place.
Warnings :
- A non conform use of the batteries can cause leaking and corrosion.
- Do not install the batteries in the wrong way.
- Do not charge, open, overheat nor short-circuit the batteries.
- Do not throw the batteries in the fire.
- Do not leave old batteries in the remote control.
- Do not use different kinds of batteries, for example an old battery with a new
one.
- If the remote control is not used during a long period, remove the batteries.
- If the remote control does not function or if you have to be near the TV to use
it: change the batteries.
- If the batteries have leaked, clean the compartment and the connectors and
put new batteries in place.
27