Connecting The Speakers - Sony WAHT-SA1 Mode D'emploi

Connecting the speakers

Insert the connectors of the speaker cords (supplied) into their corresponding speaker jacks.
The connectors of the speaker cords are the same color as their corresponding jacks. The
speakers shown are for illustration purposes only. Not all the speakers are identical.
Speaker (R:right)
The connector and color tube of the speaker cords are the same color as the label of their
corresponding jacks. Be sure to match the speaker cords to the appropriate terminals on the
speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube
to #. Do not catch the speaker cord insulation in the speaker terminals.
Connector
When connecting to the surround amplifier, insert the connector until it clicks.
Note
• When you use this wireless surround kit, do not connect the speaker cord(s) to the surround speaker jack(s)
on your Sony Home Theatre System (DAV).
6
GB
EZW-RT
S-AIR ID
A
B
C
PAIRING
SURROUND SELECTOR
SURROUND
SURROUND
Rear of speaker
Color tube
(+)
(–)
10
SPEAKER
L
R
BACK
Speaker (L:left)