Specifications - Sony WAHT-SA1 Mode D'emploi

• Move away the other components from the
surround amplifier or turn off the other
components.
Operation
The system does not work normally.
• Disconnect the AC power cord (mains lead)
from the wall outlet (mains), then reconnect
after several minutes.
12
GB

Specifications

TA-SA100WR
(Surround amplifier)
Amplifier section
Stereo mode (rated)
Surround mode (reference) RMS output power
* Depending on the source, there may be no
sound output.
Rated impedance
General
Power requirements:
North American models
Mexican models
Taiwan models
Latin American models
Other models
Power consumption
Dimensions (approx.)
Mass (approx.)
EZW-RT10
Communication System
Output
80 W + 80 W (at
3 ohms, 1 kHz, 1 %
THD)
143 W (per channel
at 3 ohms, 1 kHz,
10 % THD)*
3 - 16 Ω
120 V AC, 60 Hz
120 V AC, 60 Hz
120 V AC,
50/60 Hz
110 V – 240 V AC,
50/60 Hz
220 V – 240 V AC,
50/60 Hz
On: 50 W
85 mm × 100 mm ×
330 mm (w/h/d)
(incl. EZW-RT10)
85 mm × 100 mm ×
345 mm (w/h/d)
incl. speaker cord
cover and speaker
cord holder
1.7 kg incl. speaker
cord cover and
speaker cord
holder
S-AIR
Specification
version 1.0
12.0 mW