Precautions; Specifications - Sony CPF-MP001 Mode D'emploi

Precautions

On safety
• AC power cord must be changed only at the qualified
service shop.
• Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.
Polarity of the plug
On placement
• Do not place the system in an inclined position.
• Do not place the system in locations that are hot and
subject to direct sunlight, dusty, very humid, or
extremely cold.
• Use caution when placing the unit or AC adaptor
with subwoofer on a specially treated (waxed, oiled,
polished, etc.) floor, as staining or discoloration may
result.
On cleaning
Clean the cabinets with a soft cloth lightly moistened
with a mild detergent solution or water. Do not use any
type of abrasive pad, scouring powder or solvent such
as alcohol or benzene. Clean the Fast port connector
with a cotton bud or soft cloth on a regular basis.

Specifications

Main unit
Continuous RMS power output (reference):
Inputs
Phone (input terminal):
LINE:
Speaker units:
Dimensions (w/h/d):
Mass:
Operating temperature:
Power requirements:
AC adaptor with subwoofer
Continuous RMS power output (reference):
Speaker units:
Dimensions (w/h/d):
Mass:
Operating temperature:
Power requirements:
Supplied accessories
See page 4.
Design and specifications are subject to change
without notice.
5 W + 5 W
(1 kHz, 10% THD)
Accepts cell phones with
Sony Ericsson Fast port
connector
input mini jack (stereo)
28 mm dia.
Approx. 206 × 53 × 88 mm
Approx. 0.45 kg
10°C to 35°C
DC IN: 12 V, 1.0 A
15 W (100 Hz, 10% THD)
70 mm dia.
Approx. 218 × 74 ×
131 mm, incl. projecting
parts
Approx. 1.3 kg
10°C to 35°C
AC IN:110 V – 240 V,
0.7 A, 50/60 Hz
DC OUT: 12 V, 1.0 A
GB
9