Section 7: Securing Your Child
2
3
4
5
1. With the harness unbuckled,
place your child in the seat.
2. Secure your child with the
harness by snapping the
buckle tongues into the
crotch buckle.
3. Tighten the waste straps by
pulling on the strap ends.
4. Adjust the tightness of the
shoulder straps by sliding the
adjusters along the shoulder
straps.
5. To loosen the waist straps,
push the button on the buckle
tongue and pull the strap.
14
Section 8: Use with Infant Carrier
2
5
Attaching the RECARO
Infant Carrier
Note: Adapters sold separately.
1. Engage the parking brake
and recline the seat back to
the lowest position.
2. Line up the gray symbol on
the adapter with the gray part
on the stroller frame. Push
the adapter from the side
of the stroller frame until it
snaps into place.
3. Repeat for the other side.
4. Check to ensure the adapters
are fully latched.
5. Line up the underside of the
carry handle on the infant
carrier with the adapters on
the stroller. Lower the infant
carrier onto the adapters until
it clicks into place.
6. Gently lift up on the infant
carrier to ensure both sides
are latched.
15