Section 6: Assembly And Use - RECARO EASYLIFE Mode D'emploi

Section 6: Assembly and Use

1
2
3
4
Unfold
1. Slide thumb lock on the
handle and rotate forward to
release the frame lock.
2. Lift the frame up until it
unfolds fully and locks into
place.
Front Wheels with Swivel Lock
1. To install, insert the pin on
the wheel assembly into the
hole on the stroller frame.
Push up until the wheel clicks
into place.
2. Pull down on the front of the
wheel to ensure it is properly
attached.
3 To remove the front wheels,
push the button on the frame
and pull the wheel down and
away from the stroller.
4. To lock the swivel, lift up on
the swivel lock lever on the
front of the wheel. To unlock
the swivel, push down on the
swivel lock lever.
10
Rear Wheels Push-Push Brake
NOTE: The rear wheels come
assembled onto the frame and
are not removable.
1
1. To activate the rear wheel
2. To release the rear wheel
2
Cup Holder
1. Insert the cup holder down
1
2. To remove, lift up on the cup
Folding
1
1. Slide the thumb lock on the
2. Push frame down until it locks
11
brake, press down on the red
brake lever until engaged.
Always check to ensure the
brakes are locked.
brake, press down on the
green brake lever until
disengaged.
into the slot on the stroller
handle until it locks into
place.
holder.
handle and rotate forward to
release frame lock.
into the folded position.