Oki MFR Série Manuel D'utilisation page 7

LED Indications and Meaning
Standby & Auto Off Mode
These Modes are designed to extend tip life.
Standby – Hand-piece Power Low
•
Factory default setting 30 minutes.
•
Channel LED will flash green.
•
The standby time may be adjusted
from 0 minutes (deactivated) to 75
minutes at 5 minutes intervals.
Lifting the hand-piece or heavy vibration will trigger the motion detect switch and return full
power to the tip and re-start counter.
Use a 2.5 mm screwdriver to adjust on base of unit.
www.okinternational.com
A/C Power LED
• Green---Power On
• Red------Input Ground Fault
• Off-------Power Off
Channel LED
• Green--------------On / Ready
• Flashing Green—Standby
• Red-----------------Ground continuity
• Off------------------Channel not
. Auto Off – Hand-piece Power Off
•
Sequential to Standby Mode
•
Factory default setting 30 minutes.
•
Channel LED will be off.
•
The auto off time may be adjusted
from 0 minutes (deactivated) to 150
minutes at 10 minutes intervals.
MFR Rev. 2/13/2006
fault and
no power
selected or auto off
7