Technical Data; Noise & Vibration - Pattfield Ergo Tools PE-650 FS Traduction De La Notice Originale

Technical Data

Nominal voltage
Rated power
No-load speed (n
Diamond cutting wheel
Max. cutting depth
Work table
Work table (including extension)
Weight
Protection Class
Sound pressure level (L
Sound power level (L
Degree of protection
The values given are valid for nominal voltages U of 230 V. For lower voltage and models for
specific countries, these values may vary.
Please observe the article number on the type plate of the tool. The trade names of the individual
tool may vary.
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 61029 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure.
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the tool.
88 EN
)
0
)
pA
)
WA
230 - 240 V / ~50 Hz
650 W
5500 U/min
Ø180 mm x Ø2.4 mm x 22.2 mm
30 mm
345 x 345 mm / 0°/15°/30°/45°
400 x 510 mm
7.6 kg
I
96.9 dB(A) / Uncertainty K = 3 dB(A)
107 dB(A) / Uncertainty K = 3 dB(A)
IP20