Maintenance And Care - Mato Accu-Greaser S Mode D'emploi

Pistolet à graisse à batterie haute performance adapté pour la lubrification des machines, des véhicules et des équipements avec des lubrifiants commerciaux

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Operating manual

Set up

Accu Greaser 18V-S

- Before first use, the battery must be charged.

For further use a charging time of approximately

1 hour suffices.

- Before charging ensure that the mains voltage

matches the specifications on the nameplate

of the charger.

- To charge the battery, remove from the handle of

the device and place in the charger.

- The charging process is started automatically.

- The red diode ON indicates that the battery

is being charged.

- The green diode OFF indicates that

charging has finished.

- Filling with grease cartridges:

Only use standard (DIN 1284) 400g grease

cartridges.

- Filling with fill-device:

Set up the press with filling nipple on the fill-device.

During filling of the grease gun, keep pressed down.

- After that, insert the piston rod again completely into the

tubular body of the grease container.

- After filling of the grease gun at the filling nipple or at the

grease container, vent through a slight opening (1-1 ½ turns),

until bubble-free grease emerges.

- The grease gun is now operational.

- Press the START switch until grease emerges from the

nozzle.

- The green operating LED lights up during normal operation

As long as the START switch is pressed.

- If the max. Operating pressure 400 bar the electronic overload

limiter of the device switches Prevents the motor from overloading.

In this case, the green operation LED does not light even if the

START switch is pressed.

Break off the lubrication process and establish the reason for the high

pressure build-up. It could, for example, be that the lubrication nipple,

the lubrication line or the depository is damaged or clogged.

The current battery capacity can be recalled by the red BAT button.

The function of the button is only possible during operation.

- The temperature of the battery raises during use.

Before recharging the battery, leave to cool to room temperature,

otherwise it will not charge.