Philips HD926 Série Manuel D'utilisation page 15

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Tip
To pause the cooking process, press the start/pause button. To
resume the cooking process, press the start/pause button again.
The device is automatically in pause mode when you pull out the
pan and the basket. The cooking process continues when the pan
and the basket are put in the appliance again.
Note
If you do not set the required cooking time within 30 minutes, the
appliance automatically shuts off for safety reasons.
If "- -" is selected as the time indication, the appliance goes into
preheating mode. When the set temperature is reached, the
appliance gives a sound feedback.
Some ingredients require shaking or turning halfway through the
cooking time (see 'Food table'). To shake the ingredients, pull out
the pan with the basket, place it on a heat resistant work top,
press the basket release button to remove the basket and shake
the basket over the sink. Then put the basket into the pan, and
slide them back into the appliance.
Put the basket flat into the pan so that it lays on the support hook
in the pan. Do not tilt it.
If you set the timer to the half of the cooking time and you hear
the timer bell it is time to shake or turn the ingredients. Be sure to
reset the timer to the remaining cooking time.
10 When you hear the timer bell, the cooking time has
elapsed.
Note
You can stop the cooking process manually. To do this, press the
start/pause button.
11 Pull out the pan and check if the ingredients are ready.
Caution
The Airfryer pan is hot after the cooking process. Always place
it on a heat resistant work top (eg. trivet, etc.) when you remove
the pan from the device.
Note
If the ingredients are not ready yet, simply slide the pan back into
the Airfryer by the handle and add a few extra minutes to the set
time.
ENGLISH
15

Publicité

Table des Matières

Dépannage

loading

Table des Matières