Bodum Bistro 11451 Mode D'emploi page 5

Masquer les pouces Voir aussi pour Bistro 11451:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
– Do not operate the kettle on an inclined plane, Do not
operate the kettle unless the element is fully immersed. Do
not move while the kettle is switched on.
– To prevent damage to the appliances do not use alkaline
cleaning agents when cleaning, use a soft cloth and a mild
detergent.
inStallation
– Place the appliance on a stable flat surface which is
neither hot nor near a heat source. The surface must be
dry. Keep the appliance and its mains cable out of reach
of children.
– During use, do not place the base unit on a metal tray or a
metal surface.
– Ensure that the voltage indicated on the rating plate
of the appliance agrees with the mains voltage in your
area. Connect the appliance only to a properly earthed
power point with a minimum output of 6A. (Use a residual
current device (RCD) seek the advice of an electrician.)
While the appliance is in use, the mains plug must be acces-
sible in case of an emergency. To ensure continued pro-
tection against risk of electric shock, connect to properly
grounded outlets only
– If the power point is unsuitable for accommodating the
plug of your appliance, have the power point changed by
a licensed electrician.
SAVE THESE INSTRUCTIONS
partS of the kettle
1 Hinged lid
2 Push button to open lid
3 Scale filter
4 Water level gauge
5 ON/OFF switch
6 ON/OFF indicator light
7 Base unit
8 Max water level indicator
9 Min water level indicator
77

Publicité

Table des Matières
loading

Table des Matières