Etherma LAVA BASIC-DM Instructions D'installation Et D'utilisation page 6

G E N E R A L
ETHERMA LAVA ® design infrared heaters are versatile direct
heating devices. They are characterised, in particular, by their
elegant design, ease of installation and operation, high relia-
bility and maximum radiation power with minimal convection.
These instructions provide important information on safety, in-
stallation, use and maintenance of the device. Please read the
information provided in these instructions carefully and keep
for reference in case you will have questions at a later occasion.
The manufacturer shall not be held liable if these instructions
are not complied with. Devices may not be used improperly, i.e.
for purposes other than the intended use.
The packaging of your high-quality LAVA ® design infrared heat-
er is made from recyclable materials.
THESE INSTRUCTIONS MUST
› be given to the operator following installation. The operator
must also be instructed in the infrared heater's functionality.
› be kept safe and transferred to the new owner in case of a
change in ownership.
WARNING: Covering the surface creates a danger of
overheating. Overheating may occur and the heating
element may be damaged by covering the front of the
device, e.g. with a hand towel.
WARNING: The infrared heating may not be used if the front of
the device is damaged.
OVERHEATING AND OVERLOAD PROTECTION
All heaters have overheating protection which is activated in
the event of overheating. The device only resumes operation
automatically again after having cooled down to below 45 °C.
ATTENTION:
Hot surfaces on the device may cause
burn injuries. Switch off the device and let it cool
down before carrying out maintenance and service
works.
ATTENTION: On the surface of the LAVA ® BASIC-
DM infrared heating environmental influences
such as direct sunlight, heavy smoke, open firepla-
ces, etc. may cause discoloration of the hue.
10
This heating device is not intended for the use by persons (in-
cluding children) with a limited physical, sensory or mental
capacity or with a lack of experience and knowledge. Such in-
dividuals must be supervised by a person responsible for their
safety or instructed on use of the device. Children should be
supervised in order to ensure that they do not play with the
device.
This device can be used by children of 8 years and older and by
persons with reduced physical, sensory or mental abilities and
with a lack of experience or knowledge if they are supervised or
have been instructed on safe use of the device and understand
the resulting risks. Children may not play with the device. Chil-
dren may not clean the device or perform maintenance on it
without supervision.
Children under the age of 3 should be kept away unless un-
der constant supervision. Children between the ages of 3 and
8 may only switch the device on and off if they are supervised
or have been instructed regarding safe use of the device and
understand the resulting risks, as long as the device is placed
or installed at its intended place of use. Children between the
ages of 3 and 8 must not plug in the device, control the device,
clean it and/or carry out maintenance.
The device may only be operated once installed. This heater
may not be used in the immediate vicinity of a bath, shower or
swimming pool. When installing the device in a bathroom, the
device must be mounted so that switches or other regulators
cannot be touched by persons in a bathtub or shower. The heat-
er may not be used in small rooms occupied by persons who
cannot leave the room independently, except where constant
supervision is guaranteed.
Some product parts can become very hot and cause burns.
Particular caution is required when children or vulnerable per-
sons are present.
ATTENTION: Strain of any kind on the surface,
whether from persons or objects leaning against it
or from other forces, must be avoided!
O V E R V I E W O F T Y P E S A N D V E R S I O N S
LAVA BASIC-DM
®
The LAVA ® BASIC-DM is an infrared heating device with a high
intensity of radiation. The device is characterized by its ho-
mogeneous temperature distribution and its fast heating re-
sponse. Due to its internal insulation, it heats the room with
a maximum radiation intensity. As a standard, the LAVA
SIC-DM comes with only one connecting cable.
ET-111A RADIO RECEIVER
The radio receiver is fixed to the rear side of the LAVA
BASIC-DM. In connection with an ET-14A, the ET-111A radio
receiver provides for easy switching of up to 10 LAVA ®
infrared heaters.
S C O P E O F D E L I V E R Y | P A C K A G I N G
®
The LAVA infrared heating must be mounted exclusive-
ly using the fixing components included in the scope of
delivery.
STANDARD SCOPE OF DELIVERY FOR CEILING INSTALLATION
& WALL MOUNTING:
› LAVA ® BASIC-DM 350-1000 W
- 2 x mounting brackets
- 4 x hexagon bolts M8 x 16
- 3 x spacer discs
- 1 x safety plate (only for ceiling installation)
STANDARD SCOPE OF DELIVERY FOR CEILING INSTALLATION & WALL MOUNTING:
› LAVA ® BASIC-DM 1500 W
- 6 x retaining hooks
- 6 x Allen screws
- 1 x Allen key
ET-14A RADIO-CONTROLLED ROOM THERMOSTAT
ET-14A is a radio-controlled room thermostat which is provid-
ed with a clock for measuring the temperature in living spaces
and office spaces and in hotel rooms. Elaborate elevation and
plaster work for cable routing is avoided which allows an easy
installation. The thermostat can be mounted on a flush box or
® BA-
surface-mounted box on the wall.
WIRED ROOM THERMOSTATS:
Ideal for new buildings and renovation, for example when old
®
night storage heaters, which were controlled by thermostat,
are replaced.
Design
Screws and dowels (not included in the scope of delivery) must
correspond to the construction material of the ceiling (mason-
ry, concrete, plasterboard, etc.). The surface of the ceiling and
wall must be even.
11