Publicité
Les langues disponibles
Les langues disponibles
Removing and Installing Blade
Always ensure the tool is switched OFF and unplugged before removing or
installing the blade. To remove the blade, grip the outside flange with a box
wrench and turn the socket wrench clockwise. To install, follow the removal
procedures in reverse.
Replacing Carbon Brushes
Remove and check the carbon brushes regularly. Replace when the carbon
brushes are worn to about 6mm or less. Keep the carbon brushes clean to
ensure unrestricted movement in the holder. Both carbon brushes should be
replaced at the same time. Use a screwdriver to remove the brush caps and
to replace the worn carbon brushes. Secure the brush caps after inserting
new brushes.
Maintenance:
WARNING! WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS.
USE OF ANY OTHER PARTS MAY CREATE A HAZARD OR CAUSE PRODUCT
DAMAGE.
• Do not attempt to make any adjustments while the tool is in operation.
• Always remove the electric cord from the power supply before changing
parts, lubricating the tool or when working on the unit to avoid possible
serious injury.
• Keep the tool clean from accumulated dust.
STK#
DESCRIPTION
PRICE
21643-01 Stand
$1.20
21643-02 Knob
$1.00
21643-03 Washer (Set of 4)
$1.00
21643-04 Guiding Board
$11.90
21643-05 Rivet
21643-06 Pole
21643-07 Screw (Set of 2)
21643-08 Washer (Set of 4)
$1.00
21643-09 Pin
$2.00
21643-10 Gear Box
$7.15
21643-11 Sealer Loop
$1.75
21643-12 Bearing
$1.75
21643-13 Big Gear
$4.85
21643-14 Key
$1.85
21643-15 Shaft
$2.00
21643-16 Bearing
$2.00
21643-17 Sealing Washer
$1.75
21643-18 Cover
$6.60
21643-19 Washer (Set of 4)
$1.00
21643-20 Spring Washer (4)
$1.00
21643-21 Screw (Set of 4)
$1.65
21643-22 Flange (Set of 4)
$1.65
21643-23 Trademark
21643-25 Flange
$4.40
21643-26 Bolt
$1.65
21643-37 Screw
$1.65
21643-38 Small Gear
$2.00
STK#
DESCRIPTION
21643-39 Bearing
21643-40 Armature Assembly
21643-41 Damping Washer
21643-42 Nozzle
$.55
21643-43 Screw (Set of 2)
$.75
21643-44 Starter
$.95
21643-45 House
21643-46 Label
21643-47 Screw Bolt (2)
21643-48 Carbon Brush (2)
21643-49 Carbon Box (2)
21643-50 Damping Pole (2)
21643-51 Back Cover
21643-52 Screw (Set of 4)
21643-53 Screw (Set of 4)
21643-54 Spring Washer (2)
21643-55 Washer (Set of 6)
21643-56 Decorative Skin
21643-57 Cord Jacket
21643-58 Power Cord
21643-59 Cord Clamp
21643-60 Screw (Set of 2)
$.10
21643-61 Switch Cover
21643-62 Switch
21643-63 Knob Cover
21643-64 Handle
WARRANTY
IF THE PRODUCT FAILS WITHIN ONE YEAR FROM THE DATE OF PURCHASE
DUE TO A DEFECT IN WORKMANSHIP OR MATERIAL, Q.E.P. WILL REPAIR
AND/OR REPLACE IT FREE OF CHARGE IF THE PRODUCT IS RETURNED TO
THE RETAILER/DISTRIBUTOR WHERE IT WAS ORIGINALLY PURCHASED.
THIS WARRANTY DOES NOT COVER NORMAL WEAR AND TEAR TO THE
PRODUCT, OR ANY DAMAGE THAT RESULTS FROM ACCIDENT, MISUSE,
ABUSE, OR NEGLIGENCE. Q.E.P.'S OBLIGATION UNDER THIS WARRANTY IS
LIMITED TO REPAIR AND/OR REPLACEMENT OF THE PRODUCT. LIABILITY
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE OR LOSS IS
SPECIFICALLY EXCLUDED, AND Q.E.P. SHALL HAVE NO LIABILITY FOR ANY
SUCH INCIDENTAL OR CONSEQUENTIAL DAMAGE. THIS WARRANTY IS
VOID IF THE PRODUCT OR ANY OF ITS COMPONENTS ARE MODIFIED,
ALTERED, OR IN ANY WAY CHANGED, OR IF THE PRODUCT IS USED IN A
MANNER OR WITH A BLADE THAT IS NOT RECOMMENDED BY Q.E.P. ALL
ACCESSORIES ARE EXCLUDED FROM THE WARRANTY AND SUBJECT TO
THE MANUFACTURER'S WARRANTY. IF THE PRODUCT IS USED FOR OTHER
THAN PROFESSIONAL PURPOSES, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE IS EXCLUDED.
NO EXPRESS WARRANTIES ARE GIVEN. BUYER ASSUMES ALL RISK OF
USE, HANDLING, AND STORAGE OF THE PRODUCT NOT IN STRICT
ACCORDANCE WITH THE INSTRUCTIONS.
PRICE
$2.00
$19.35
$2.00
$3.00
$1.65
$16.85
$16.85
$.10
$1.65
$4.40
$2.20
$1.65
$4.25
$1.85
$1.85
$1.65
$1.25
$2.00
$4.85
$7.90
$.75
$1.65
$3.85
$13.20
$.75
$5.90
3
Publicité
