Magnavox 47MF439B Manuel De L'utilisateur page 23

8 Update your TV software
Magnavox continuously tries to improve its products and we strongly
recommend that you update the TV software when updates are
available.
New software can be obtained from your dealer or downloaded from
the www.magnavox.com/support website. Use the type number of your
TV (e.g. 47MF439B) to fi nd information.
Check your current software version
1
Press MENU on the remote control and select [Installation] >
[Current software version] .
» The version and a description of the current software is
displayed.
TV menu
Installation
Language
Channels
Preferences
Source labels
Clock
Current software info
Reset AV settings
Prepare for the software upgrade
You require the following equipment:
• A PC with web browsing capability.
• An archive utility that supports the ZIP-format (e.g. WinZip for
Windows or StuffIt for Mac OS).
• A USB memory stick.
Release version:
xxxxx
Note
•
Only FAT/DOS-formatted portable memory is supported.
•
New software can be obtained from your dealer or can be downloaded from the www.
magnavox.com/support website.
•
Use only software upgrades that can be found on the Magnavox web site.
Warning
•
Do not remove the USB device during the software upgrade.
•
If there is a power drop during the upgrade, do not remove the USB device from the
TV. The TV continues the upgrade as soon as the power comes back.
•
If you try to upgrade to a software version lower than the current version, a
confi rmation message is displayed. Downgrade to older software only in case of real
necessity.
•
If an error occurs during the upgrade, retry the procedure or contact your dealer.
Download the software
1
On your PC, open a web browser and go to www.magnavox.com/
support.
2
Find information and software related to your TV and download
the latest software upgrade fi le to your PC.
3
Decompress the ZIP-fi le.
4
Copy the autorun.upg fi le to the root directory of the USB device.
Upgrade software
1
Prepare the software upgrade (see 'Prepare for the software
upgrade' on page 23 ) .
2
Connect your USB device to the USB port on the side of your TV .
» The TV scans the USB device for the updated software and
automatically enters upgrade mode.
3
Read the on-screen instructions and confi rm that you want to
continue with the installation.
4
When the software upgrade is complete, remove the USB device .
5
Disconnect the TV from the power socket outlet.
6
Reconnect the TV to the power socket outlet.
7
Press POWER at the side of the TV to switch on the TV.
» The TV starts up with the new software.
EN
23