Magnavox 47MF439B Manuel De L'utilisateur page 10

Switch on and set up the TV
The TV turns on automatically after the power cord is inserted into the
power connector. The following screen appears:
Thank you for your purchase of this MAGNAVOX TV.
Please proceed with the following steps to set-up your TV. For the BEST
possible picture performance, contact your local Cable / Satellite signal
provider for High Definition signal options available in your area.
Next
Press the GREEN Next button located on your remote control to proceed.
Follow the on-screen instructions to select your language and complete
your TV setup.
Note
•
If you connect your TV to a cable box or satellite set-top box, you do not need to install
channels. Press the red button on the remote control to exit this stage of the setup.
Finish the setup by selecting your location:
• If you choose [Retail store] your settings are erased each time you
turn off the TV. Use this mode for retail store displays.
• If you choose [Home] you are guided through a choice of display
options. Press the left or right cursor buttons to select your
preferred screen.
EN
10