Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CAMERA IDENTIFICATION SUBMENU
Use this submenu to name the camera and view it in the required position on the monitor. Use the joystick
to move from one character to the next. Press it in the middle to select the character to which you are
pointing. The arrows on the bottom move the cursor on the name without changing the characters:
ABCDEFGHIJKLMNO
PQRSTUVWXYZabcd
efghijklmnopqrs
tuvwxyz 01234567
89 ()<>-/#*!?,.
CLR deletes the selected characters.
POS positions the name on the screen (it is advisable not to position it too far right or too far down).
MAINTENANCE
This menu is used to:
intervene on CCD faults by compensating for white pixels. The function can localise and
•
compensate for up to 64 white pixels.
fully re-initialise (reset) the camera.
•
•
Option
W. PIX MASK
CAMERA RESET
WHITE PIXEL MASK SUBMENU
Automatic mode allows an optimal white pixel detection. The CCD sensors detect white pixels
automatically. A compensation threshold (from normal to high) can be defined or automatic compensation
can be selected.
LEVEL1
LEVEL2
AUTO
Manual mode records white pixel information (up to 64 white pixels).
DS 1092-171
CLR POS
Value
AUTO ÷ MANUAL ÷
DATA CLEAR
CAMERA
RESET/BACK
AUTO COMP
■█■■■■■■■ 007
■■■■■■■■█ 255
White pixel compensation mode. For expert user only
(see below).
This fully re-initialises (resets) the camera. Double
confirmation is required for safety.
Explanation
27
Publicité
Table des Matières
