Cleaning And Maintenance; Ce-Statement - EUROM 247091 Manuel D'utilisation

Cooling, switching off and storing
Before the device is completely switched off, it must be allowed to cool. Set the
output switch to setting I for at least 1 minute, then the device can be switched off
properly. The device can be left on the stand while cooling down. Never leave the
device unattended.
Make sure that the whole device is cooled before storing.

Cleaning and maintenance

NB: Before cleaning and maintaining the device, ensure that the plug is removed
from the socket and that the device has cooled down completely.
Keep safety devices, ventilation openings and the motor casing free of dust and
dirt. Clean the machine with a clean cloth or blow dust out with compressed air,
under low pressure. We recommend that the machine is cleaned after each use.
Clean the machine regularly with a damp cloth and a little soap. Do not use
aggressive cleaning agents or solvents; they could damage the plastic components
on the machine. Make sure that water does not penetrate the machine's inner
workings.
Removal

CE-statement

Hereby, Eurom-Kokosstraat 20-Genemuiden-NL declares that the Eurom
electric weedburner type Electric Weedburner meets and is in accordance with
the following standards:
LVD 2014/35/EU
EN 60335-1:2012+A11:2014
EN 60335-2-45:2002+A1:2008+A2:2012
EN 62233:2008
RoHS 2011/65/EU&(EU)2015/863
Genemuiden, 31-10-2019
W.J. Bakker, alg. dir.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment
contains valuable materials, suitable for recycling. These
materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that
you bring old equipment to a designated collection point.
Alternatively, contact the original supplier, who can make sure
that as many of the components as possible can be recycled.
EMC 2014/30/EU
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3 :2013
41