EUROM 247091 Manuel D'utilisation page 40

Initial use
 Make sure that the extension rod/handle is secured properly and that the
machine is switched off.
 Check to ensure that all of the relevant safety measures have been applied.
 Secure the mouthpiece to treat the weeds.
 Insert the plug into the socket.
 Guide the electrical cable through the cable clamp (and the extension cable, if
used) and away to the back.
 Check to ensure there is nothing in front of the mouthpiece before you switch
the device on.
 Set the temperature to setting II.
 Let the device warm up for around 45 seconds.
 To remove the weed, place the mouthpiece over the plant for around 5 seconds.
 During this time, the cell structure of the weed will be destroyed. The weed will
then die within a few days.
 It is not necessary to burn the weed, 5 seconds is all it takes to kill it.
 For effective treatment, the mouthpiece must be placed 0-5 cm from the weed.
 The effects are not immediately visible; it may take a few days before you can
see the difference. You are making a long-term difference.
 If you are treating plants with hard leaves, you may have to repeat the process
at intervals of 1 to 2 weeks.
Option 2: BBQ/fire-starter
 When used to light the BBQ and/or an open fire, the device must be used
without the extension piece.
 Place the BBQ mouthpiece on the burner mouth (attachment method is the same
as securing the mouthpiece for burning weeds)
 Place the mouthpiece under the coals or wood
 Make sure that any fire-lighters are positioned correctly
 Insert the plug into the socket.
 Check that the mouthpiece is not blocked before switching the device on.
 Slide the ON/OFF and power switch to setting II; the device will start working.
 Remove the device from the coals or wood blocks one they start to glow.
 Then blow hot air into the coals or wood at a distance of around 10-20 cm until
the coals or wood burn properly.
 Damage to the BBQ mouthpiece will be avoided if you follow these instructions.
Exposing the mouthpiece to high temperatures for a long period could lead to
damage. Follow these instructions to ensure that the product functions
effectively in the long term.
NB: Never heat the coals or wood longer than necessary as this could damage your
BBQ or open fire.
40