▪ When using an extension lead, it must be unwound
fully to prevent the lead from overheating.
▪ Always connect and disconnect the power lead when
the temperature is set to the minimum and to stop.
▪ To prevent electric shock, do not immerse the lead,
plug or body of the appliance in water or any other
liquid. Do not handle them with wet hands.
▪ Do not leave the lead hanging from a table or
worktop.
▪ Do not place the appliance and its lead on or near a
surface which is likely to become hot (cooking plate,
gas burner, oven, etc.).
▪ Place the appliance on a stable and dry surface,
slightly away from the edge and further than 20 cm
away from any wall and heat-sensitive element.
▪ Caution: Do not insert aluminium foil or any other
material or object between the plate and the frame
(ventilation zone).
▪ Do not obstruct the ventilation holes in the bottom
plate under the frame.
▪ Do not obstruct the frame's ventilation inlets.
▪ Warning: Do not use the appliance with charcoal or
any power source besides the one for which it is
designed (electricity).
▪ Disconnect the plug when the appliance is not in use
or before cleaning it.
- 15 -