Télécharger Imprimer la page

Alecto BC-60BT Mode D'emploi page 28

Publicité

Les langues disponibles

Les langues disponibles

The height is indicated by "Height" in the screen. Use the supplied measur-
ing tape to measure the head's circumference. Slide the triangle to enter the
value at "Head size". When all data is known and entered, press "Save" to
save all data (if the baby is not lying completely still, a notification may appear informing you that the weight
isn't stable and cannot be saved. In this case, press the "
press "Save" in the app). Press the "
The last value is now saved in the scales. After the display stops flashing, the scales will show the progress
since the last measurement. The arrow allows you to quickly determine whether the weight has increased or
decreased. When performing multiple daily measurements, the last measurement is saved in the memory.
To share measurements:
Press the
button to share measurements via social media.
To check measurements in the growth curve:
Press the
button in the measurements screen of press "Growth Curves"
in the start-up screen.
You may check the following curves:
Weight/Age - Weight in Kg / Age.
Height/Age - Height in cm / Age.
Head size/Age – Head size in cm / Age.
Weight/Height - Weight in Kg / Height in cm.
Slide the screen upwards to check other curves.
Press the picture of the curve to enlarge the curve.
Press "All data" in the upper right corner to adjust, add or remove data.
After setting up the first baby, each time you start the app again the alongside
image will appear in the start-up screen.
To weigh with the app:
When the data of the baby are entered, press
"Measurements", when multiple babies are
entered, press "User" and select the desired
child.
The measurements screen will now appear.
Make sure that the Bluetooth
your smartphone or tablet is activated. Switch
on the scales. Put your baby onto the scales
according to the instructions in -To weigh-.
The weight of your baby will now be shown
in the weight curve in the measurements
screen. Follow the procedure -To measure
height- to determine the height.
" button on the scales to fix the weight; the display flashes twice.
®
function of
" button on the scales to fix the weight and then
28

Publicité

loading