Alecto BC-60BT Mode D'emploi page 26

USE
The scales must be prepared to be able to measure your baby's height.
Remove the rubber spacer at the beginning of the weighing platform.
Extract the head support from the front of the scales and insert it into the opening you made earlier by remov-
ing the rubber spacer.
Flip up the feet support and slide it to the right until there's enough space for the baby to lay on the weighing
platform.
Operation:
To prevent undesired enabling or disabling of any functions, you must firmly press down on the buttons. You'll
feel a click as soon as the button is pressed down properly.
To switch on:
1. Press and hold the button for at least a second; all digits of the scales' display will now illuminate.
2. The scales are ready for use as soon as the kg digits illuminate.
0
To weigh:
1. Switch on the scales according to the above instructions.
2. Slide the height measure to a height exceeding the height of your baby.
3. Put down the baby in the middle of the scales.
4. As soon as the scales have determined the weight, the weight display will remain fixed.
button to save the weight; the display flashes twice.
5. Press the
0 reset:
When you first switch on the scales and then cover them with a towel or cloth, the scales will indicate the
weight of what you've put down. You can then briefly press the 0 reset button to set the read-out back to
.
0
26