Meeting Around A Table - HumanTechnik CM-light Mode D'emploi

Meeting »around« a table
1. Plug the headset into your CM-light.
2. Slide the mode selector switch to the Zoom position.
3. Position your CM-light as close as possible to the speaker, whereby the device's
microphone unit should be pointing as directly as possible towards the speaker.
4. Switch the CM-light receiver on at the on/off switch.
5. Adjust the speech volume to a comfortable level by setting the volume controller on
your CM-light to an appropriate level.
You are taking part in the meeting shown.
The other people are speaking at different
levels.
Use the "Zoom" transmission mode to reduce
disruptive sounds from behind perceptibly and,
at the same time, to amplify speech in front
of you.
English 25