Hudora BigWheel Crossover Instructions De Montage Et Mode D'emploi page 6

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING
THIS PRODUCT!
Please read these instructions carefully. The instructions are an
integral component of the product. Therefore, please store them and
the packaging carefully in case questions arise in the future. Please
always include these instructions when handing on the product to
a third party. This product must be assembled by an adult. This
product is designed for private/domestic use only. This product is
not designed for commercial/industrial use. The use of the product
requires specific skills and knowledge to be able to avoid injuries due
to crashes and collisions. Always adjust according to the age of the
user and use for the purpose it has been designed for.
TECHNICAL SPECIFICATIONS
Item: HUDORA BigWheel
(Wheel size: 205 mm)
Item number: 14100/00
Dimensions: approx. 88 cm in length, deck approx. 33 x 11.5 cm
Product weight: approx. 4.1 kg
Class: A, 100 kg maximum user weight
Purpose: Leisure scooter for use on public areas, no toy.
If you have assembly problems or would like further information on
the product, we have all you need and more at www.hudora.de.
CONTENTS
1 x Scooter | 1 x These instructions
Other parts which may be included with the delivery in some
circumstances are not required.
SAFETY INSTRUCTIONS
• Wear suitable protective clothing for your own safety. Wear
personal protective equipment. This includes at least: hand/wrist
guards, knee pads, head protection and elbow pads. Never use the
scooter without shoes!
• The scooter is only intended for use by one person.
• Only use the scooter on surfaces that are suitable for it, i.e. those
which are flat, clean, dry, and use the scooter where possible
away from other road users. Avoid sloping ground. The brakes
may become hot if the scooter has been used for a while! Your
footwear could be damaged! The brakes shouldn't be touched
until they have cooled down.
• Always be considerate of others.
• Before you begin – Ensure that all fasteners and locking parts are
intact and tight, e.g. the folding mechanism and the height setting
of the handlebar. The functions of self-securing screw threads
can be impaired after repeated loosening and tightening of the
connecting elements. Check especially for the correct alignment
and fastening of the steering set-up.
• Make sure that the stand is folded safely while driving.
• Do not use the scooter at twilight, at night or in poor visibility. Do
not use it on roads or thorough-fares or on slopes or hills. Avoid
being in the proximity of stairs and open water.
• The scooter is not suitable for jumps.
• Prior to using the scooter, please inform yourself about restricting
applicable traffic regulations for the intended area of application.
• The use of the product requires specific skills and knowledge to
be able to avoid injuries due to crashes and collisions.
• Children should only use the product when they are under adult
supervision.
Crossover
®
• Ensure when riding that the logo on the handlebar points to the
front or else that the push buttons is as such oriented backwards.
INSTRUCTIONS ON ASSEMBLY
No tools are required to assemble the product. The scooter is
delivered in its transport form (folded)! (Picture 1)
PLEASE PROCEED AS FOLLOWS TO GET THE SCOOTER READY FOR USE
• Pull on the lever to the right above the running board to loosen the
transportation lock (Picture 2)
• Unfold the scooter's handlebars upwards.
• Now push the folding hinge towards the handlebar stem until you
hear it click into place. (Picture 3)
• Insert the handlebar grips into the T-section of the handlebar
stem. Use your thumbs to press down both locking buttons until
the the grips can be easily pushed into the T-section. Turn the
handlebar grips until the locking buttons are positioned in the two
openings intended for them and you hear them click into place.
Check that both handlebar grips are fitted correctly by pulling
both outwards. If they do not move, they have been assembled in
accordance with the instructions. (Picture 4)
• Loosen the quick release lock on the handlebar rod by pushing
the lever of the quick release lock until the lever is parallel to the
handlebar grip. (Picture 5)
• The handlebars can be locked into place at 4 different heights.
Pull the handlebar rod out of the handlebar stem until it is at the
required height and the relevant button has snapped into place.
(Picture 7) The maximum height cannot be exceeded due to the
integrated lock. If the handlebar does not sit firmly at the required
height, open the quick release lock again and turn it a few times
so that the fastening bracket fits more tightly to the handlebar
rod. Repeat this process until the handlebar rod can be aligned
securely. (Picture 6)
• Now close the quick release lock by pushing the lever down to the
handlebar stem.
• Always check all parts before use to ensure they are fitting tightly,
particularly the folding mechanism, the handlebar locking and the
wheels.
TO GET THE SCOOTER READY FOR TRANSPORT AGAIN,
PLEASE CARRY OUT THE FOLLOWING ACTIONS
• Loosen the quick release lock by pushing the lever of the qucik
release lock away from the handlebar stem.
• Please press the locking button so that the handlebar rod can be
moved. (Picture 6)
• Push the handlebar rod as far as it will go into the handlebar stem.
• Close the quick release lock by pushing the lever down to the
handlebar stem.
• Use your thumbs to press both locking buttons in the handlebar
grips and pull the handlebar grips outwards until they are released
completely from the T-section. (Picture 4)
• Push the handlebar grips down until they are parallel with the
handlebar shaft.
• Pull the lever (to the right above the running board) in order to
loosen the assembly lock. (Picture 2)
• Fold up the scooter by moving the handlebar rod towards the back
wheel until you hear the transport lock click into place.
6/24