What If There Are Problems - Beurer PS 45 BMI Mode D'emploi

9. What if there are problems?

If the scale detects and error when measuring, the following is displayed.
Display
0Ld
Lo
No measurement possible
Possible errors
The batteries in the scale are empty.
Incorrect weight measurement
Possible errors
Scale is on carpeting.
Incorrect zero point of scale.
Cause
The maximum load capacity of
180 kg was exceeded.
The batteries are almost empty.
Remedy
Do not load the unit with over 180 kg.
Replace the batteries.
Remedy
Replace the batteries.
Remedy
Place the scale on a level and solid surface.
Place a scale on a secure, fl at surface. Switch on the
scale and wait until the scale automatically switches
off again (do not step onto the scale before then).
Then switch on the scale again and repeat the meas-
urement.
11