Maintenance Table; Maintenance Intervals - GYS SPOT LIFT EASY Notice Originale

Translation of the original notice

MAINTENANCE TABLE

Maintenance intervals

Monthly
Annual
Every 5 years of service
Maintenance must be carried out at regular intervals.
Use the «Regular Security Check» form and the «Maintenance Log» to archive regular and annual checks.
Make a copy of the SPOT LIFT EASY status report and attach it to the operating instructions.
Regular safety checks must be carried out by an authorised person. It is recommended to perform maintenance
simultaneously.
CHECK POINT AND LUBRICATION
• Grease or lubricate the chain with a suitable product.
• Grease the internal part of the column.
• Lubricate the wheel axles.
• Check that the individual screws are tightened correctly.
SPOT LIFT EASY
Task
Check, clean and lubricate all moving
parts, in particular the chain, the
interior of the column and the wheel
axles
Check the condition of the fork
Check the condition of the hoses
Check the tightness of the connec-
tions
Check the hydraulic oil level
Check that the markings are still
legible
(contact after-sales service)
Replace the entire hose
Remarks
Refer to "Check and lubrication
point".
"Replace if necessary
(Refer to the exploded view)"
"Replace if necessary
(Refer to the exploded view)"
"Replace if necessary
(Refer to the exploded view)"
Position the fork in the lowered
position. Unscrew the oil level gauge
located on top of the pump and
check that the level is between the
two lines. Top up if necessary. Use
only LUBRILOG L HV22 oil.
Replace if necessary
(contact after-sales service)
Use only LUBRILOG L HV22 oil.
Quantity 1.4L
"Replace if necessary
(Refer to the exploded view)"
EN
19