Clean The Stainless Steel; Inspect The Parts - Arneg Nimes LX Manuel D'installation Et De Service

•
tergent or soap and lukewarm wa-
•
water or detergent using a dry
from forming
Wood •
ify that the cleaner will not damage
•
tergent or soap and lukewarm wa-
•
water or detergent using a dry
from forming

24.7 Clean the stainless steel

clean with shampoo or neutral detergents, using a sponge or a rag.
ing the surfaces.
surfaces
ATTENTION
i

Inspect the parts

1 check that all parts are perfectly clean and dry
2 check that they are not damaged or too worn
3
4 install the parts perfectly dry
5 restore electrical power supply
05060200 00 10-2020
- •
•
metal scrapers that scratch the aluminium
surfaces
•
• DO NOT use dirty cloths
• DO NOT use spray cans, acid or alkaline de-
-
could corrode the surfaces
•
- could scratch the surfaces
•
• DO NOT use rough cloths
•
use causes seepage and then swelling of the
wood
Nimes LX
English
-
-
55