Rotary Hammer Safety Warnings; Standard Accessories; Optional Accessories (Sold Separately) - Hitachi DH 25PA Mode D'emploi

English

ROTARY HAMMER SAFETY WARNINGS

1. Wear ear protectors
Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3. Do not touch the bit during or immediately after
operation. The bit becomes very hot during
operation and could cause serious burns.
SPECIFICATIONS
Model
Voltage (by areas)*
Power Input
No-load speed
Full-load impact rate
Capacity: concrete
steel
wood
Weight (without cord and side handle)
Function
*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Case (Molded plastic) ............................................... 1
(2) Side handle ............................................................... 1
(3) Stopper ....................................................................... 1
(4) Dust cup .................................................................... 1

OPTIONAL ACCESSORIES (sold separately)

1. Drilling anchor holes (Rotation + Striking)
Drill bit (Slender shaft)
Drill bit (Slender shaft)
Outer diameter
3.4 mm
3.5 mm
7
(110V, 115V, 120V, 127V, 220V, 230V, 240V)
Rotation + Striking
Adapter for slender shaft
(SDS-plus shank)
Drill bit (slender shaft)
Effective length
45 mm
4. Before starting to break, chip or drill into a wall,
floor or ceiling, thoroughly confirm that such items
as electric cables or conduits are not buried inside.
5. Always hold the body handle and side handle of
the power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
DH25PA
650W*
0 – 1100/min.
0 – 4000/min.
3.4 – 25 mm
13 mm
32 mm
3.4 kg
Standard accessories are subject to change without
notice.
Overall length
90 mm
DH25PB
Rotation + Striking,
Rotation only