Select Temperature - Waeco TropiCool TC 14FL-AC Notice D'emploi

Operation
✓ The red or blue operating display lights up and the device starts to cool/
heat.
➤ When you want to finish the cooling or heating process, press the button
"ON/OFF" (fig. 2 A, page 3).
➤ When you stop using the cooler, disconnect it from the mains.
6.5

Select temperature

The status display of the temperature (fig. 2 F, page 3) indicates the select-
ed temperature range. With an increasing number of illuminating LEDs, the
intensity of the temperature range also increases.
NOTE
I
The following temperature indications are subject to tolerances and
are dependent on the measuring position.
Interior space-temperature at approx. 25 °C ambient temperature:
Status display
seven illuminating LEDs
Cooling
an illuminating LED
seven illuminating LEDs
Heating
an illuminating LED
➤ If you want to select the temperature to cool/heat, press the button
"Temp" (fig. 2 F, page 3), until the requested temperature range is
reached.
6.6 Connect to the cigarette lighter
NOTE
I
When you connect the cooling box to the cigarette lighter of your
vehicle (fig. 3, page 3), observe that you have to turn on the igni-
tion, if necessary, so that the device is supplied with current.
22
Temperature range
approx 1 °C in the interior space
approx 16 °C in the interior space
(ECO mode)
approx 65 °C in the interior space
approx 50 °C in the interior space
TC
EN