Pioneer PDK-TS06 Mode D'emploi page 16

Assembling the stand
4
. Lift up the protective sheet covering
the foot starting from the perforated
line in the center to reveal the mount-
ing surface.
5
. Remove the cover of the bar removed
in step 2, insert the bar on the guide
pins, and tighten with the included
stand assembly screws.
CAUTION:
Tighten the screws securely.
If not, the monitor could tip over, resulting in in-
jury.
6
. Grasp the two boxes containing the
feet and turn them upside-down
again.
Perforated line
guide pins
E-6