Siemens Gigaset SE 105 Guide D'installation Rapide page 27

PPTP
◆
Enter those parameters that you have been given by your Internet service
provider.
Example for access data to an aon account with Telekom Austria:
IP address (of the server): 10.0.0.138
Router IP address: 10.0.0.140
Subnetwork mask: 255.255.255.0
Please read page 27 to find out how to avoid unnecessary connection costs
Cable modem
◆
If you have been given a host name by your Internet service provider, please
enter it.
In the Maximum idle time box, enter the time after which the
Internet connection is to be cut automatically if no data is sent. If you
enter 0 minutes, the connection will never be cut automatically. This
can lead to high transmission costs, if you use a time-based Internet
rate!
!
Deactivate the Automatic re-dial option, if you do not want the
browser, messenger or email programs to automatically open a
connection to the Internet. This will save costs if you do not have a flat
rate arrangement. Please turn to page 29 to read about setting up a
connection manually.
13. Click on FINISH to complete the set-up. Your router will now try to open a
connection to the Internet.
14. Click on Close in the navigation bar to finish configuration.
15. Click on Cancel to close the Web browser.
Your router is now ready to use.
Quick Installation Guide
27