Siemens Gigaset SE 105 Guide D'installation Rapide page 24

Quick Installation Guide
Windows XP
Make sure that the Use Windows to configure the settings function has
been deactivated.
This can be done as follows:
1. Click on Start - Control panel - Network and Internet connections -
i
2. In the General tab, click on the Properties button.
3. Deactivate in the Use Windows to configure the settings tab the
Once you have deactivated the Windows configuration you can set up the network:
1. Click on Start - Control panel.
2. Click on the Network and Internet connections icon and then on the Network
connections icon.
3. Double-click on the LAN connection with which you are connected to the router.
4. In the General tab, click on Properties.
5. Select Internet protocol (TCP/IP) and click on the Properties button.
6. Activate the options Automatically obtain IP address and Automatically obtain
DNS server address in the General tab.
7. Click on OK or Close to close each window.
8. Restart the network (see below).
Restarting the network
1. Restart the router by briefly unplugging the power supply unit from the mains socket
and then plugging it in again.
2. Check that the PWR-LED on the front panel of the router is constantly on.
3. Reboot your PC.
24
Network connections - LAN or high-speed Internet.
Wireless networks option.