Honeywell FH-971E Manuel D'utilisation page 6

Cleaning
1. Before you start cleaning the fan heater,
turn the rotary power switch (3) to the OFF
position (4) and unplug the appliance from
the power supply.
2. Clean the air intake opening (11) and air
exhaust opening (2) with a vacuum cleaner,
so as to remove the dirt from the motor and
heating element.
3. Clean the surface of the fan heater with a
soft, damp cloth.
4. Restart the fan heater as described in the
„operating instructions".
Maintenance
1. The fan heater does not require special
maintenance.
2. If the fan heater has to be repaired, always
contact an authorised workshop.
3. If the power cable has to be replaced, a
power cable of type 2x1mm
HAR must be used.
CONDITION OF PURCHASE
As condition of purchase the purchaser assumes
responsibility for the correct use and care of this
fan heater according to these operating instruc-
tions. The purchaser or user must himself or her-
self decide when and for how long the fan
heater is to be in operation.
ENGLISH
WARNING: IF PROBLEMS ARISE WITH
THIS FAN HEATER, PLEASE OBSERVE
THE INSTRUCTIONS IN THE GUARAN-
TEE CONDITIONS. DO NOT ATTEMPT
TO OPEN OR REPAIR THE FAN
HEATER YOURSELF, AS THIS COULD
LEAD TO TERMINATION OF THE
GUARANTEE AND CAUSE DAMAGE
TO PERSONS AND PROPERTY.
Technical modifications reserved.
2 H05VVF
6