sylvac PS16 V2 Mode D'emploi page 3

Description
1. MODE button
2. SET button
3. "Favourite" button
4. Mini-USB
5. Compartment for battery CR2477 or CR2032.
6. Adapter CR2477/CR2032
7. Adjustable release lever
8. Optional stop
9. Travel stop
10. Force adjustment knob
11. Anvils locking screw Ø1.5mm
12. Moving measurement spindle for Sylvac Ø1.5 probe and Cary compatible probe
13. Fixed measurement spindle for Sylvac Ø1.5 probe and Cary compatible probe
14. Moveable tailstock
15. Tailstock position locking screw
16. Measurement unit
17. Proximity cable housing
Handling
Unblocking the transport mode axes
Place the 2 optional stops (on the front and rear of the unit) in their middle position.
First use
For the first use, after a complete stop (off) or battery change, the instrument will
request a new reference measurement (--rEF--).
Move the measurement axis to the end of its run, (fully entered)
3
E