Intended Use; Technical Data - EINHELL RT-MG 12 Li Mode D'emploi D'origine

Anleitung_RT_MG_12_Li_SPK7__ 30.08.13 11:14 Seite 13

4. Intended use

The multifunction tool is suitable for sanding/grinding
small areas. A sanding/grinding tool with a vacuum
extractor must be used for sanding/grinding large
areas.
The equipment is designed for the sanding/grinding
of wood, iron, plastic and similar materials using the
appropriate sanding/grinding paper. Furthermore, the
equipment is intended for sawing wood, plastic and
similar materials, as well as scraping off glued
carpets, filling compound residues, old paint and
similar applications.
The equipment may only be used for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

Motor power supply:
Idling speed:
Oscillating speed:
Sanding/grinding area:
Oscillation angle:
Protection class:
Charge voltage for rechargeable battery:
Charge current for rechargeable battery:
Battery charger supply voltage:
Charging time:
Battery type:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Handle
Vibration emission value a h = 2.970 m/s²
Uncertainty K = 1.5 m/s 2
Additional information for electric power tools
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
12 V DC
the equipment with another electric power tools.
-1
5000-17000 min
The specified vibration value can be used for initial
-1
10,000 – 34,000 min
assessment of a harmful effect.
90 x 90 x 90 mm
Reduce noise generation and vibration to a
3°
minimum!
II /
Use only equipment that is in perfect condition.
n
12 V DC
Maintain and clean the equipment regularly.
n
Adopt your way of working to the equipment.
n
0.5 A
Do not overload the equipment.
n
230 V ~ 50Hz
Have the equipment checked if necessary.
n
approx. 3 hours
Switch off the equipment when not in use.
n
Wear gloves.
n
Lithium-ion
0.8 kg
GB
78,5 dB(A)
3 dB
89,5 dB(A)
3 dB
13