Latching The Cooling Device Lid; Setting The Temperature - Dometic CC 32 Manuel D'utilisation

Operation
A
NOTICE! Danger from excessively low temperature!
Ensure that only those objects are placed in the cooling device that are
intended to be cooled at the selected temperature.
➤ Press the "ON/OFF" button for between one and two seconds.
✓ The "POWER" LED lights up.
✓ The display switches on and shows the current cooling temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓ The cooling device starts cooling the interior.
I
NOTE
When operating with the battery, the display switches off automatically
if the battery voltage is low. The "POWER" LED flashes orange.
6.6

Latching the cooling device lid

➤ Lift the latch (fig. 1 1, page 2) and close the lid.
➤ Release the latch.
✓ The latch audibly clicks in place and secures the cooling device lid.
6.7

Setting the temperature

➤ Press the "SET" button once.
➤ Use the "+" and "–" buttons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
14
CC32, CC40 AC/DC
EN