Soehnle Fit Connect 200 HR Mode D'emploi page 20

can use the device settings in the app to define which
values and functions your device displays.
EN
Measuring your pulse
To measure your pulse, put the fitness tracker on and switch
to pulse rate mode (4.2). Hold the sensor button down for
approx. 5 seconds. The pulse is now measured and shown
on the corresponding display. Finding the pulse can take a
few seconds initially. Wear the tracker directly against your
skin, otherwise no measurement is possible. To deactivate
the pulse function, hold down the sensor button for approx.
5 seconds whilst pulse measurement is switched on. Once
released, pulse measurement switches off.
Activating sleep mode
First switch to displaying sleep mode (4.10) by touching
the sensor button. Now hold the sensor button down for
approx. 5 seconds. Sleep mode is activated.
Deactivating sleep mode
Touch the sensor button to activate the display. Touch the
sensor button again and hold this down for approx. 5 sec..
Data transmission to smartphone / tablet
Start the Soehnle Connect app. Drag the app down in
the main screen (dashboard). The data saved from your
tracker will then be automatically transferred to the app
via Blue tooth . Make sure that Bluetooth
®
your appliance.
Switch Bluetooth on and off
®
You can switch Bluetooth off in any mode except in clock
®
(4.1) or pulse frequency mode (4.2). Touch and hold the sen-
sor button for approx. 5 seconds to enter the menu to switch
the function on and off. Then switch Bluetooth
pushing the button again. The tracker automatically switches
is activated on
®
on or off by
®