Sony SCA-S30 Mode D'emploi page 43

B Use washers and nuts to secure the speaker.
5
Connect the audio signal cable and power cables to the speaker.
A Loosen the adjustment bolts on the left and right sides of the speaker as much as
possible, and adjust the angle of the speaker as shown.
Adjustment bolts (left and right)
B Connect the audio signal cable to the AUDIO IN connector, the power cables to the
power input connector (24 V AC), and the grounding wire to the U grounding
terminal.
The unit should always be grounded.
U grounding terminal
AUDIO IN connector
Audio signal cable
Power input connector (24 V AC)
Power cable
Power cable
Installation 17
GB