Domnick Hunter PNEUDRI DX102 Manuel D'installation, De Mise En Service Et D'entretien page 34

Transportation and tariffs
DRYFIL® is classified as 'NON-HAZARDOUS' for transportation.
Storage
The product is stable indefinitely at ambient temperature. It will, however, lose its desiccant and adsorption properties
when heated to 900˚C.
This product evolves heat on contact with moisture. Ideally, it should be stored in a clean dry warehouse, in the original
package, on pallets.
It should not be stored with materials subject to catalytic decomposition.
Fire and explosion hazard
The product is non-flammable. Any fire should be fought by means appropriate to the material causing the fire. Contact
with water will cause the evolution of heat and may thus generate pressure in a confined space.
Handling and disposal of spent material
This information is dependent upon the application. Great care should be exercised with spent material. As a powerful
adsorbent, the product may retain hazardous or flammable components from the process fluid. The process vessels
should be purged of contaminants before discharge, normally after regeneration. To remove residual vapours the spent
product should be thoroughly drenched with water during or after discharge.
CAUTION! HEAT WILL BE GENERATED!
It is also possible that the product may contain decomposition, polymerisation or trace contaminants from the process
fluid and should be treated accordingly. Dust may have been created in service.
The product should be disposed of into a licensed land fill site.
This reply is based on information which was available at this moment in time. To the best of our knowledge we believe
this information to be correct at the time of printing.
32