Alecto AK-5 Guide De L'utilisateur page 35

Alarm clock and snooze settings:
This clock also provides wake-up functions. You may set 2
wake-up times. The alarm clock is activated when the alarm
clock icon appears in the display, by sliding the sliders at
the sides upwards to the "ON" position. The left slider is used
for alarm clock 1 and the right slider for alarm clock 2.
Z
While the snooze function is active, the snooze icon Z keeps
flashing.
Every 5 minutes an alarm signal will sound. While the alarm is
active, the alarm clock icon keeps flashing.
Wake-up time setup:
H
LO
ALARM MODE
ALARM
Slide the function switch to . At ALM-1 (alarm 1 /
ALARM 2 ALAR
wake-up time 1), the wake-up time starts flashing.
Use the "+" and "-" buttons to set the desired
RESET
TIMER
SET
STOPWATCH
wake-up time. Press the "SNOOZE & LIGHT" button
to switch between Alarm 1 and Alarm 2. After finishing your
settings, slide the function switch back to: . The wake-up
time(s) is/are now set.
Slide the switch(es) at the sides upwards to "ON" to activate
the wake-up time(s). The alarm clock icon of the
concerned alarm or wake-up time appears in the display.
To stop the wake-up signal:
As soon as the wake-up time is reached, the clock will sound
an alarm signal. For the first 10 seconds the alarm signal has a
slow rhythm.
In between 10 and 20 seconds the rhythm of the alarm signal
increases. From 20 to 30 seconds the rhythm is even faster
and as of 30 seconds the alarm signal has the fastest rhythm.
The wake-up signal continues for up to 180 seconds.
-35-