Alecto AK-5 Guide De L'utilisateur page 33

Clock:
After inserting the batteries, the clock starts synchronizing with
the DCF-77 time signal. The DCF-77 reception icon starts
flashing to indicate that the DCF-77 signal is being received.
flashing on off
busy receiving the DCF-77 signal no DCF-77 signal
DCF-77 signal reception successful received
The clock automatically starts synchronizing with the DCF-77
signal at 2am and 3am.
You may also manually synchronize the clock by pressing and
holding the "-" button for 2 seconds. The reception icon
starts flashing.
The synchronizing process will take several minutes.
During summer time the icon appears. DST stands for
Daylight Saving Time.
To manually set the time:
If it's not possible to receive the DCF-77-signal, you may set
the clock time manually. During the manual setup, several other
functions may be set.
H
LO
Slide the function switch to the position. "12 Hr" or
ALARM MODE
ALARM
"24 Hr" starts flashing in the display. Use the "+" and
ALARM 2 ALAR
"-" buttons to set the values.
RESET
TIMER
SET STOPWATCH
Confirm each step by pressing the "SNOOZE/
LIGHT" button.
-33-