Télécharger Imprimer la page

SEVERIN Ideeo Mode D'emploi page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Ironing
Steam ironing requires high temperatures. The temperature level for
steam ironing is indicated on the temperature control knob.
After fi lling the reservoir with water, place the steam iron upright on its
base stand and insert the plug into the wall socket.
Set the temperature control knob to the required ironing temperature as
indicated by the ironing symbols.
During the heating-up process the indicator lamp will be on. The lamp
will go out once the required ironing temperature is reached.
Before ironing any fabrics, the soleplate should be cleaned by passing it
over an old, clean cotton cloth, while using the steam jet function; this
helps to fl ush out any dirt residues or lint particles trapped inside the
openings in the soleplate.
The steam output can be adjusted with the steam control button or
completely switched off for dry ironing.
For dry ironing, the water reservoir may be empty. Should there be water
left in the reservoir, the steam jet function may also be used when dry-
ironing at higher temperature settings.
Place the steam iron upright on its base stand after use and remove the
plug from the wall socket.
Steam Jet
When the steam jet button is depressed, an additional hot steam jet is
emitted from the soleplate. This function can be very useful when the regular
amount of steam emitted is not suffi cient to remove stubborn creases or
when ironing diffi cult or thick fabrics.
The steam jet function may also be used with the iron held vertically, to
remove creases or wrinkles from fabrics.
Using the Spray Nozzle
The laundry can be dampened by pressing the spray button. This will help to
smooth out diffi cult areas. The spray nozzle may be used at any temperature
level during dry or steam ironing.
General Care and Cleaning
Before cleaning the appliance, ensure it is disconnected from the power
supply and has cooled down completely.
To avoid the risk of electric shock, do not clean the appliance with water
and do not immerse it in water.
If necessary, the unit may be wiped with a dry fuzz-free cloth.
Starch, fat and other deposits on the soleplate may be removed with a
12

Publicité

loading