Vasco E-BANO Manuel D'utilisation Et D'installation page 29

Parameter
Power setting of the radiator
This parameter has to be configured in order to calculate power consumption and to
select adapted regulation parameters.
Press the
setting.
Default value = 750W (displayed value = 75)
Power limitation of the radiator
This parameter permits to reduce the power of the heater in order to protect any child or
person when they touch the radiator. Press the
value (from 25-50-75-no) and press the
Default value = No (=100%)
Thermostat configuration: "prog" or "easy"
If this parameter is "no", only 2 modes are available and the thermostat can't apply a
program. If it is "yes", all mode of the thermostat are available. Press the
buttons to change and press the
Note: If this parameter is modified, thermostat mode will be in Comfort mode
Default value = Yes
Room temperature limitation
Limitation of the maximum room temperature to set. Press the
change and press the
Default value = 30°C
Boost temperature set point
Set point temperature when boost is activated. Press the
change and press the
Default value = 30°C
CLr – reset to factory settings
Press and maintain the
switches off) to reset to default settings:
- set point temperature of Comfort (=19°C), Eco (=17°C) and Anti-freeze mode (=7°C)
- program U1 to U4
- boost time (=30 min)
- parameter settings
- time and day
NOTE: power setting of the radiator isn't reset
Software version
Press and maintain the
Exit parameter menu
Press the
Description
or
buttons to change and press the
button to validate the setting.
button to validate the setting.
button to validate the setting.
button for minimum 5 seconds (until the LCD screen
button to display the software version.
button to exit parameter menu and return to operating mode.
button to validate the
or
buttons to change the
button to validate.
or
or
or
buttons to
buttons to
7