Vasco E-BANO Manuel D'utilisation Et D'installation page 25

OPERATING AND PROGRAMMING MODES
Use the button to select an operating mode and activate with the
Auto mode
Auto mode :
In this mode, the thermostat will follow the chosen program (standard P1 to P9 or customized U1
to U4) according to the actual time and the Comfort and Eco setting temperature.
By pressing and
current program temperature. The value starts to blink and can be modified. By pressing
button, the set point value is validated. The hand
function is active. This override will continue until the next step (program switch to another temperature set point)
or during 24h maximum.
Comfort mode :
In this mode, comfort temperature set point (default = 19°C, range = 10-30°C) will be followed all
the time. By pressing
can be modified. By pressing
used in AUTO mode during a comfort period of a selected (week)program.
Eco mode :
In this mode, the eco setting temperature (default = 17°C, range = 5-19°C) will be followed all
the time. By pressing
be modified. By pressing
used in AUTO mode during a eco period of a selected (week)program.
Anti-freeze mode :
In this mode, the anti-freeze set point (default = 7°C) temperature will be followed all the time.
Displayed temperature:
In any operation mode, from the screensaver (lighted backlight),
displaying between measured temperature and setting temperature.
BOOST
The boost allows to heat up to the maximal set point temperature during a certain time.
Boost can be activated at any time with the button
(Auto, Comfort, Eco or Anti-freeze).
The boost duration is standard 30min and can be changed from 15min to 2h with the buttons
and , to validate this time press the
To deactivate the boost mode press the button
Comfort mode Eco mode
buttons, the user can easily override, until next program step, the
and buttons, the comfort setting temperature starts to blink and
button, the set point value is validated. This set point will be
and buttons, the eco setting temperature starts to blink and can
button, the set point value is validated. This set point will be
button.
for more than 1sec.
button.
Anti-freeze mode
logo will be displayed when override
button permits to switch
regardless of the current operating mode
Auto mode overwrite
Comfort mode
Eco mode
Anti-freeze mode
Set point / measured
temperature
Boost mode
Off mode
3