Open Window Detection - Vasco E-BANO Manuel D'utilisation Et D'installation

Setting the week program:
1. Use the button to select
With a Built-in program (P1-P9):
2.1.1 Press the or
a program (P1-P9) for the current day
of the week.
2.1.2 Press the button to go to the
next day.
2.1.3 Repeat step 2.1.1 and 2.1.2 for the other days.
2.1.4 Confirm the week program with the
button
2.1.5 The thermostat returns in Auto mode.
ITCS: Intelligent Temperature Control System
This function assures the desired temperature at the start of a Comfort or Eco period
following the week program in
with the "ITCS parameter" (see chapter "parameter settings").

OPEN WINDOW DETECTION

The open window detection is standard activated, if the function is active, the icon
This detection is sensitive to variations in temperature. The thermostat goes in to Anti-freeze mode when a
window being opened. This depends on various parameters: temperature set point, rise and fall of room
temperature, external temperature, position of the radiator in the room, etc. In case of installation of a radiator in
close proximity to an entrance door, the open window detection could be impaired by air currents caused by the
door being opened. If this causes a problem, we recommend to deactivate the open window detection (see
chapter "parameter settings").
and confirm with the
button to select
mode. This function can be deactivated
button to enter the program mode.
With an User program (U1-U4):
2.2.1 Press the or
the current day of the week.
2.2.2 Press and hold the
U4), the first day of the week will be active.
Eco/Comfort period
Selected day
Time interval
2.2.3 Press the button to activate an Eco temperature period
OR press the button to activate a Comfort temperature
period at the current time interval (=30min). Validate the user
program (U1) with the button.
2.2.4 If you want to copy the edit user program (U1) for the next
day, press the button. Select "No" with the
and validate with the button.
2.2.5 Repeat step 2.2.3 and 2.2.4 for the other days.
th
2.2.6 If the 7 day is validated, the thermostat returns in Auto mode.
button to select a program (U1-U4) for
button to edit an user program (U1-
Program
number
or
Roomtemperature
will appear on the screen.
button
Set point
5