BraunAbility Carolift 90 Instructions D'utilisation page 23

Troubleshooting
Carolift is not being activated when
control button is pressed. ..................................
Carolift runs unusually slow. .............................
- End position is reached. Aktivate reversed movement.
- Power circuit is broken. Check that the control pendant cable is connected to the
hoist socket. (The cable is fixed with a bundle band, near the socket, to divert
force).
- Car battery is discharged. Charge the car battery.
- Short circuit has released the automatic fuse. Contact the workshop.
- Car battery is discharged. Charge the car battery.
- In an emergency situation: Try to start the car and let the motor run while
activating the hoist.
23
Carolift 90 and 140
EN